If your vacuum cleaner smells, it’s probably time to give it a good cleaning. Over time, dirt, dust, and other debris can build up inside the vacuum, causing it to smell bad.
Don’t worry, though cleaning a smelly vacuum is easy to do and only takes a few minutes.
Here’s what you need to do.
Change The Dirtbag Or Empty The Canister
The first thing you need to do is change the dirtbag or empty the canister. If your vacuum has a dirtbag, simply remove it and replace it with a new one. If your vacuum has a canister, empty it into the garbage.
Either way, getting rid of the old dirt and debris will help to eliminate the bad smell. In this guide, we will explain how to clean a vacuum cleaner that smells.
Clean The Filters
Next, you need to clean the filters. Most vacuums have two types of filters: a HEPA filter and a foam filter. The HEPA filter is located in the dust cup or canister, while the foam filter is located inside the vacuum itself.
To clean the HEPA filter, simply remove it and tap it against a hard surface to remove any dirt and debris. To clean the foam filter, remove it and rinse it under cold water. Allow both filters to air dry completely before putting them back in the vacuum.
Clean The Hose
If your vacuum has a detachable hose, detach it and clean it separately. Start by running the hose under cold water to remove any dirt and debris. To create a bleaching solution for your dishes, mix two parts bleach with one part dish soap. Instead of using bleach, you could try using baking soda or vinegar.
Apply the bleach solution to the hose using a sponge or brush, then rinse it off with cold water. Allow the hose to air dry completely before reattaching it to the vacuum.
Learn More: Top 10 Most Common Cleaning Equipment in Housekeeping
Clean The Brush And Roll
The brush roll is located at the bottom of the vacuum, and it helps to agitate the carpet and loosen up dirt and debris. Over time, the brush roll can become clogged with dirt and debris, which can cause it to smell bad.
To clean the brush roll, remove it from the vacuum and use a hard-bristled brush to remove any dirt and debris. You may also need to use a pair of scissors to cut away any tangled hair or fibres. Once you’ve removed all of the dirt and debris, put the brush roll back in the vacuum.
Clean The Rest Of The Vacuum
Finally, use a damp cloth to wipe down the rest of the vacuum, including the inside of the dust cup or canister.
Pay special attention to any nooks and crannies where dirt and debris can hide. Once you’re finished, put everything back together and enjoy your clean, fresh-smelling vacuum!
How To Prevent Bad Odors
Now that you know how to clean a smelly vacuum, it’s time to learn how to prevent bad odours from happening in the first place. The best way to do this is to empty the dirtbag or canister after each use.
This will help to prevent dirt and debris from building up and causing an odour. You should also clean the filters regularly, as well as the brush roll. Doing these things will keep your vacuum smelling fresh and help it last longer.
But here are a few solutions that you can use to remove the annoying order from your vacuum cleaner. But make sure that these methods are allowed and don’t void the warranty.
Baking Powder
Put a few tablespoons of baking powder in the dust bag or canister. Let it sit for a few hours before you vacuum again.
The baking powder will absorb the bad odour from the vacuum. Baking powder is a good absorbent of the bad order.
Learn More: Are Carpet Cleaners The Same as Steam Cleaners?
Essential Oil
You can also use a few drops of essential oil to freshen up your vacuum. But make sure that the essential oils don’t contain any harmful chemicals.
A good rule of thumb is to test it on a small area before using it on the entire vacuum.
Vinegar
Another solution is to mix equal parts vinegar and water in a bowl. Then, put the mixture in a spray bottle and spritz it onto the areas that need to be cleaned. Allow the vinegar to sit for a few minutes before wiping it clean with a damp cloth.
Now that you know how to clean a smelly vacuum and prevent bad odours from happening, you can keep your home smelling fresh and clean. Vacuuming is an important part of keeping your home clean, and it’s important to do it regularly.
But if you have a smelly vacuum, don’t worry. With a little elbow grease and these helpful tips, you can get rid of the bad odour and keep your vacuum smelling fresh and clean.
Why Does My Vacuum Smell Bad?
If you’ve noticed that your vacuum has started to smell bad, you’re not alone. Many people have the same problem.
There are a few different reasons why vacuums can start to smell bad. The most common reason is that the vacuum isn’t being cleaned regularly. When dirt and debris build up, it can cause an unpleasant odour.
Pet Hair
If you have pets, their hair can also contribute to a bad-smelling vacuum. Pet hair can be difficult to remove, and it can quickly build up in the vacuum.
Mould Accumulation
Another reason why vacuums can smell bad is because of mould accumulation. Mould loves to grow in dark, damp places.
If your vacuum is stored in a garage or basement, it’s more likely to develop mould.
Excessive Dust
Another common cause of bad-smelling vacuums is excessive dust. When there’s too much dust in the vacuum, it can start to smell bad.
This is especially true if the vacuum doesn’t have a HEPA filter.
Dirty Filters
One of the most common reasons why vacuums smell bad is because of dirty filters. Filters need to be cleaned regularly, or they can quickly become clogged.
When this happens, it can cause the vacuum to smell bad.
Conclusion
If your vacuum smells bad, there are a few different things you can do to fix the problem. The most important thing is to clean the vacuum regularly. This will help to prevent dirt and debris from building up and causing an odour.
You should also clean the filters regularly, as well as the brush roll. Doing these things will keep your vacuum smelling fresh and help it last longer.
