How To Replace A Vacuum Cleaner Belts : 5 Steps

To help us provide you with free impartial advice, we may earn a commission when you purchase through links on our site. Learn More.

It’s that time of year again when your vacuum cleaner belts have started to wear out and you have to replace them. Replacing a vacuum cleaner belt may seem like a daunting task, but it’s really not that difficult.

In this blog post, we will walk you through the 5 steps necessary to replace your vacuum cleaner belt quickly and easily!

What Is Vacuum Cleaner?

A vacuum cleaner is a device that uses an air pump to create a partial vacuum, which sucks up dust and dirt, usually from floors or carpets. The first ever recorded use of a vacuum cleaner was in the 17th century when British inventor Cornelius Drebbel used an air pump to create suction to clean the floor of Westminster Abbey.

However, it wasn’t until the late 19th century that the modern vacuum cleaner was invented. In 1901, American inventor Hubert Cecil Booth patented a design for a motorized vacuum cleaner, and his company soon began mass-producing the devices.

Today, vacuum cleaners are an essential part of many households, and their popularity shows no signs of waning.

Why Need To Replace A Vacuum Cleaner Belt?

One of the most important parts of a vacuum cleaner is the belt. The belt helps to drive the brush roll, which is what helps to loosen and lift dirt and debris from the floor.

Over time, the belt can become stretched or damaged, which can reduce its effectiveness. As a result, it’s important to replace the belt on a regular basis. Most vacuum cleaners come with a spare belt, so it’s easy to keep your vacuum running smoothly.

Simply remove the old belt and install the new one following the manufacturer’s instructions. In no time at all, you’ll be back to enjoying clean floors.

The 5 Simple Steps On How To Replace Vacuum Cleaner Belts

One of the most important parts of a vacuum cleaner is the belt. The belt helps to rotate the brush roll, which is what actually cleans your floors.

Over time, the belt can become stretched or worn, causing the brush roll to spin more slowly and reducing the vacuum’s overall cleaning power.

If you notice that your vacuum isn’t cleaning as well as it used to, it’s probably time to replace the belt. Here are a few simple steps to help you do just that:

Step 1: Locate The Belt And Identify The Type Of Belt Needed

Replacing the belt on your vacuum cleaner is an essential part of routine maintenance. Not only will this help to extend the life of your vacuum, but it will also ensure that it continues to clean effectively.

The first step is to locate the belt and identify the type of belt needed. Depending on the model of the vacuum, the belt may be located under a plate or panel on the side of the vacuum.

Once you have located the belt, take note of its size and type. Then, head to your local hardware store or home improvement center to purchase a replacement. Be sure to bring along the make and model of your vacuum so that you can purchase the correct belt.

With a new belt in hand, simply follow the instructions in your vacuum’s manual to replace the old one. In most cases, this is a relatively simple process that can be completed in just a few minutes. However, if you are uncertain about how to replace the belt, consult with a professional or watch a tutorial video online.

Step 2: Remove The Screws Or Bolts That Hold The Cover In Place

Once you have identified the type of belt needed, it’s time to remove the cover over the belt. Depending on your vacuum model, you may need to remove the screws or bolts that hold this cover in place.

Be sure to keep track of all screws and other parts during disassembly. When working with an older vacuum cleaner, it’s a good idea to take pictures of the parts as you are taking them off. This can help you when reassembling the vacuum cleaner later.

Step 3: Release The Tension On The Belt And Remove It From Around The Pulleys

Now that you have the cover off, it’s time to release the tension on the belt and remove it from around the pulleys. Usually, this is as simple as squeezing in on both sides of the belt and pulling it away from the pulleys.

However, if there are any other holding mechanisms or clamps that need to be removed first, make sure to follow the steps outlined in your vacuum manual.

Once all of the old belts have been removed and replaced with a new one, you can thread them onto the pulleys. Again, refer to your vacuum manual for specific instructions regarding how to thread a replacement belt onto your vacuum cleaner’s particular model pulley.

Step 4: Install A New Belt, Making Sure To Put Tension On It Correctly

Now that the new belt is in place, make sure to put tension on it correctly. This is important as too much or too little tension can cause the belt to slip and reduce its lifespan.

To ensure that you have the correct amount of tension, refer to your vacuum’s manual for specific instructions regarding how much tension is required for your model.

Step 5: Replace The Cover And Secure Screws Or Bolts

The last step is to replace the cover and secure any screws or bolts that you may have removed. Make sure to double-check that all of the parts are in place before turning on your vacuum cleaner for use.

Now that you know how to properly replace a vacuum cleaner belt, it’s time to get started! With these five simple steps, you can quickly and easily replace your vacuum belt and be back up and running in no time.

Be sure to follow all safety precautions when replacing your vacuum cleaner belt and always consult with an expert if you have any questions or concerns. Good luck!

About Editor

Leave a comment